Home › Balance › InMode RF
Balance · Radiofrequency
InMode PRO: Two Handpieces, Two Jobs
only for your balance
InMode is a name for a system, not for a procedure. What it does to your face depends entirely on which applicator is chosen, and that’s a decision, not a default.
onlif-lifting-inmode-hero-side-01.jpg · patient portrait for inmode, calm, natural light · 1200×1500 · AI OK
Quick Answer
What is InMode, actually?
A platform. The applicator is the treatment.
In Brief
A radiofrequency system with several applicators.
InMode is a manufacturer whose devices deliver bipolar radiofrequency energy to the skin and the tissue beneath it. Different applicators do quite different jobs: fractional RF microneedling drives energy through fine pins into the dermis and subdermal layer, while other handpieces work non-invasively across the surface or, in their minimally invasive form, beneath it. When a clinic says it offers InMode, the useful question is which applicator, at what depth, for which concern.
Pillar
Balance
Type
Bipolar RF: Mini FX and Forma applicators
Best known for
Fat reduction and skin tightening
Works on
Subdermal fat (Mini FX) and dermis (Forma)
Commonly planned as
A short series; assessed per applicator
Assessed by
Which applicator, at what depth
Compare with
Thermage · Onda · Potenza
Understanding It
How Radiofrequency Differs From Ultrasound
Focused ultrasound reaches a fixed depth and delivers energy to a precise point. That’s what makes devices like Ultherapy suited to the deep support layer. Radiofrequency works differently: it heats tissue by passing current between electrodes, and the depth is governed by the applicator rather than by the focus of a beam.
The fractional microneedling form is the one most people mean. An array of fine coated pins delivers bipolar RF into the dermis and the layer beneath it, treating small columns of tissue while leaving the skin between them untouched. That untreated tissue is what makes recovery quick. It acts as a reservoir of healthy cells that speeds the repair of everything around it.
Because depth is adjustable, the same applicator can be set for skin quality and texture in one area and for deeper remodelling in another. That flexibility is the platform’s real advantage over single-purpose devices, and also why it makes little sense to book it by name without knowing the settings.
onlif-device-inmode.webp | InMode PRO (InMode Ltd) product cut-out on white, portrait | 900x1200 | ONLIF SUPPLIES
The Device
InMode
Device InMode PRO — Mini FX and Forma handpieces
Mini FX 41-43°C with high voltage pulses; reduces fat
Forma multipolar energy at about 43°C; collagen and elastin
Safety cut-off system reading temperature 1,000 times per second
Afterwards brief redness; avoid sauna, swimming, hard exercise and peels for a week
Not for a thin face, where fat reduction is not wanted
We use the genuine manufacturer handpiece and consumables. You are welcome to ask to see them before treatment.
At Onlif
The Two Applicators We Use
Mini FX
Targets fat beneath the skin. Radiofrequency holds the tissue at around 41-43°C while high-voltage pulses reduce fat cells, with vacuum drawing the tissue to the applicator. Used for a full lower face and under the chin.
Forma
Targets the dermis rather than fat. Multi-polar radiofrequency held at around 43°C to stimulate collagen and elastin. Used where the issue is skin quality and firmness rather than volume.
The applicator is chosen by what’s actually causing the change: fat, skin quality, or both. Temperature is monitored continuously during treatment, keeping it comfortable and reducing the risk of burns.
Candidacy
Who It May Be For
It suits people whose concern is a combination of laxity and skin quality. Softening along the lower face together with texture, enlarged pores or fine lines, where a purely lifting device would leave half the problem untouched.
It also suits people who would rather not have injectables, and people who have had fillers and remain unhappy with the quality and firmness of the skin itself. Those are two of the situations where RF microneedling earns its place in a plan.
It suits less well where the change is primarily descent of deeper structure, which is a job for the deep support layer, or where skin excess is genuinely surgical. Your doctor assesses which of those you have before choosing anything.
The Visit
What to Expect
The area is cleansed and mapped, and topical numbing is applied and left to take effect. Treatment then proceeds section by section at the depths chosen for your skin.
The system monitors skin temperature up to a thousand times a second and cuts power if the surface reaches its set limit. Treatment runs at a target tissue temperature of roughly 41-43°C. That’s a meaningful safety feature rather than marketing, and it is part of why the treatment is well tolerated.
Expect some redness and a sandpapery texture for a few days after fractional treatment, more than with a purely non-invasive device and considerably less than with resurfacing. Your plan will tell you what to expect for your settings before you commit.
For a week afterwards, avoid saunas, swimming and vigorous exercise, and pause exfoliating acids and peels. Sun protection daily.
A Note
What We’ll Tell You First
Some InMode applicators are non-invasive and some are minimally invasive, which means working beneath the skin through a small entry point. Those aren’t the same commitment, and they should not be presented under one brand name as though they were.
At consultation we’ll tell you which applicator is being proposed, what it does, and what it does not. If the answer is that a different device or a different pillar suits your face better, that’s what you’ll hear.
Honest Alternatives
If Something Else Fits Better
Onlif
Non-fractional radiofrequency across the surface, where firmness is the whole concern.
Lifting
Shurink Universe
Focused ultrasound across seven cartridges, where depth needs varying by area.
Key Points
What to Take Away
- Two handpieces: Mini FX reduces fat, Forma firms skin. Usually used together.
- Mini FX holds tissue at 41-43°C and adds high voltage pulses, which destroys fat cells.
- That reduction lasts, because the cells are destroyed rather than shrunk.
- Forma heats the dermis to about 43°C for collagen and elastin.
- Wrong treatment for a thin face. We map hollow-prone zones and keep energy away.
- A cut-off system reads temperature a thousand times a second.
- Warmth rather than pain. Brief redness afterwards.
- No sauna, swimming, hard exercise or peels for a week.
FAQ
Questions People Ask
Warmth builds gradually through the session and you may feel briefly hot. Most people describe it as easier than conventional radiofrequency. The cut-off system stops the energy if skin temperature climbs too high.
It can, if used on the wrong face. The treatment reduces fat, so a thin face is the wrong candidate. Onlif marks hollow-prone zones before treating and keeps energy away from them, and if your assessment shows you do not have fat to lose we’ll say so.
The fat cells treated are destroyed rather than shrunk, so that reduction holds. Remaining fat cells can still enlarge with weight gain, so it isn’t a substitute for weight management.
Temporary redness or a warm feeling, usually settling quickly and not affecting your day. Use moisturiser generously and sun protection on the treated area.
Saunas, spas, swimming and vigorous exercise for a week, since they raise skin temperature. Also pause physical and chemical exfoliation for the same period.
With Ultherapy where the deep support layer has also loosened; with a fat-dissolving injection for a stubborn double chin; with masseter toxin where the fullness is muscle rather than fat. Your doctor will tell you which, and why.
only for your balance
Begin With Your Face, Not a Menu
Which device suits you is an assessment decision. That is where every plan at Onlif begins. Onlif Clinic is in Seocho-gu, Seoul.